<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: My Account
On the My Account tab, you can define and edit settings for the user account. All settings are specific to the user account.
This documentation refers to an administrator that accesses the PRTG web interface on a master node. Other user accounts, interfaces, or failover nodes might not have all of the options in the way described here. In a cluster, note that failover nodes are read-only by default.
If 15 minutes (900) seconds have passed since your last credential-based login and you open a setup page from a different setup page, PRTG asks you to enter your credentials again for security reasons. A dialog box appears. Enter your Login Name and Password and click OK to continue.
In this section:
PRTG App Login
PRTG App Login
|
|
QR Code
|
Click Show QR Code for PRTG App Login to display the QR code and to copy your account settings to a PRTG app.
|
User Account Settings
User Account Settings
|
|
Login Name
|
Enter a login name for the user account.
The login name must not contain the following invalid characters: " / \ [ ] : ; | = , + * ? < >
This option is not available in PRTG Hosted Monitor.
|
Display Name
|
Enter a display name that you recognize. PRTG uses it for display purposes only, for example on the Welcome page.
If the name contains angle brackets (<>), PRTG replaces them with braces ({}) for security reasons. For more information, see the Knowledge Base: What security features does PRTG include?
|
Primary Email Address
|
Enter the primary email address. This is the email address that PRTG uses by default for the ticket system, including important system messages, and password recovery.
Make sure that your email client can show HTML emails, otherwise you cannot read emails from PRTG.
|
Password
|
Define whether to change the password for the user account:
- Do not change the password
- Specify a new password
For security reasons, PRTG does not display the password.
If you specify a new password, enter the old password, then enter the new password twice.
The new password must be at least 8 characters long. It must contain a number and a capital letter.
Do not use leading or trailing whitespaces in the new password.
This option is not available in PRTG Hosted Monitor.
|
Passhash
|
Click Show passhash to display the passhash for the user account. This is necessary for authentication for the PRTG API.
This setting is for your information only. You cannot change it.
This option is not available in PRTG Hosted Monitor.
|
API Access
These settings are only available in PRTG Hosted Monitor.
API Access
|
|
API User Name
|
Shows the API user name of the user account. This is necessary for authentication for the PRTG API.
This setting is for your information only. You cannot change it.
|
API Passhash
|
Click Show passhash to display the API passhash of the user account. This is recommended for authentication for the PRTG API.
This setting is for your information only. You cannot change it.
|
Generate API Passhash
|
Click Generate new passhash to reset the passhash of the user.
|
Account Settings
Account Settings
|
|
Primary Group
|
Select the primary group for the user account from the dropdown menu.
Every user account must be a member of a primary group to make sure there is no user account without group membership. Membership in other user groups is optional.
You cannot change the primary group of Active Directory users. Users that you add via Active Directory integration can only have the respective Active Directory group as their primary group.
|
Status
|
This setting is for your information only. You cannot change it.
|
Last Login
|
Shows the time stamp of the last login of the user account.
This setting is for your information only. You cannot change it.
|
Group Membership
Group Membership
|
|
Member of
|
Shows the user groups that the user account is a member of. You can define access rights to device tree objects, libraries, maps, reports and the ticket system at group level.
This setting is for your information only. You cannot change it.
|
PRTG Web Interface
PRTG Web Interface
|
|
Automatic Refresh
|
Define if you want PRTG to automatically reload web pages in the PRTG web interface for the user:
- Automatically refresh pages (recommended): PRTG automatically refreshes single page elements on web pages in the PRTG web interface.
- Do not automatically refresh pages: PRTG does not automatically refresh single page elements on web pages in the PRTG web interface.
|
Refresh Interval (Sec.)
|
This setting is only visible if you select Automatically refresh pages (recommended) above. Enter the number of seconds that PRTG waits between two refreshes. We recommend that you use 30 seconds or more. The minimum value is 20 seconds. The maximum value is 600 seconds.
Shorter refresh intervals create more CPU load on the probe system. If you experience load issues while using the PRTG web interface (or maps), set a longer refresh interval.
|
Audible Alarms
|
Define whether PRTG plays an audible alarm on web pages in the PRTG web interface when there is a new alarm:
- Do not play audible alarms: PRTG does not play sound files on any web pages.
- Play audible alarms on dashboard pages only: When there is a new alarm, PRTG plays a predefined sound on dashboard pages only. The sound is played with every refresh of the dashboard page if there is at least one new alarm.
- Play audible alarms on all pages: When there is a new alarm, PRTG plays a predefined sound on all web pages. PRTG plays the sound with every page refresh if there is at least one new alarm.
PRTG only plays audible alarms if the New Alarms value in the global header area of the PRTG web interface is greater than 0 after a page refresh. PRTG does not consider the number of old alarms.
For more information, see the Knowledge Base: Which audible notifications are available in the PRTG web interface and in PRTG Desktop? and Why are audible alerts in public maps not working in Chrome?
|
Home Page URL
|
Define the user's default home page in the PRTG web interface. This is the page that the user sees after logging in or when selecting Home from the main menu. Enter a PRTG-internal web page.
|
Time Zone
|
Define the time zone for the user account. Depending on the time zone that you select, PRTG shows the local time zone of the user account in all data tables and graph legends.
PRTG receives the Coordinated Universal Time (UTC) from the system time of the PRTG core server for this purpose.
If you get a warning message about differing time zones, see the Knowledge Base: Why do I get a warning message when time zones differ?
|
Date Format
|
Select the date format for the user:
- Use System Settings: Use the date format of the PRTG core server system.
- DD.MM.YYYY HH:MM:SS (24h)
- DD.MM.YYYY HH:MM:SS (A.M./P.M.)
- MM/DD/YYYY HH:MM:SS (24h)
- MM/DD/YYYY HH:MM:SS (A.M./P.M.)
- YYYY-MM-DD HH:MM:SS (24h)
- YYYY-MM-DD HH:MM:SS (A.M./P.M.)
This setting takes effect after the next login.
|
Color Mode
|
Select a color mode for the PRTG web interface:
|
Ticket System
Ticket System
|
|
Email Notifications
|
Define if the user receives emails from the ticket system:
- Receive an email when a ticket changes: The user receives an email each time a ticket is assigned to the user or to the user group they are a member of, or if a ticket is changed.
If the user edits tickets that are assigned to them or the user group they are a member of, or if they assign a ticket to themselves or their user group, they do not get an email.
- Do not receive any emails from the ticket system: The user does not receive any emails from the ticket system.
|
Save your settings. If you leave the page, all changes to the settings are lost.
More
Knowledge Base
What security features does PRTG include?
Which audible notifications are available in the PRTG web interface and in PRTG Desktop?
Why are audible alerts in public maps not working in Chrome?
Why do I get a warning message when time zones differ?
Others
There are some settings that you must make in the PRTG Administration Tool. For more details, see the sections: