<%NUMBERING1%>.<%NUMBERING2%>.<%NUMBERING3%> PRTG Manual: VMware Virtual Machine (SOAP) Sensor
The VMware Virtual Machine (SOAP) sensor monitors a virtual machine (VM) on a VMware host server using the Simple Object Access Protocol (SOAP).
VMware Virtual Machine (SOAP) Sensor
For a detailed list and descriptions of the channels that this sensor can show, see section Channel List.
Sensor in Other Languages
- Dutch: VMware Virtuele Machine (SOAP)
- French: VMware machine virtuelle (SOAP)
- German: VMware Virtual Machine (SOAP)
- Japanese: VMware 仮想マシン(SOAP)
- Portuguese: Máquina virtual VMware (SOAP)
- Russian: Виртуальная машина VMware (SOAP)
- Simplified Chinese: VMware 虚拟机 (SOAP)
- Spanish: Máquina virtual VMware (SOAP)
Remarks
Detailed Requirements
|
|
.NET 4.7.2 or later
|
This sensor requires .NET 4.7.2 or later to be installed on the probe system (on every cluster node, if on a cluster probe).
If the framework is missing, you cannot create this sensor.
For more information, see the Knowledge Base: Which .NET version does PRTG require?
|
Settings on VMware Host System
If you set up this sensor on different probes (for example, when using remote probes or when running a failover cluster), you might need to change the settings of your VMware host so that it accepts more incoming connections. Otherwise, you might get connection timeouts when running plenty of VMware sensors with a short scanning interval.
For details about this setting, see the Knowledge Base: How can I increase the connection limit on VMware systems? PE121.
Add Sensor
The Add Sensor dialog appears when you manually add a new sensor to a device. It only shows the settings that are required to create the sensor. You can change nearly all settings on the sensor's Settings tab after creation.
PRTG requests a full list of all VMs configured on the target device. Because of this, it might take a few seconds before the dialog appears.
VMware Virtual Machine Settings
|
|
Virtual Machines
|
You see a list of all VMs available on the host server on this device, including the ones that do not run. PRTG lists all VMs by name and the operating system that they run on. Select the VMs that you want to monitor. PRTG creates one sensor for each VM that you select.
|
Basic Sensor Settings
Click the Settings tab of a sensor to change its settings.
Basic Sensor Settings
|
|
Sensor Name
|
Enter a name to identify the sensor.
|
Parent Tags
|
Shows tags that the sensor inherits from its parent device, parent group, and parent probe.
This setting is for your information only. You cannot change it.
|
Tags
|
Enter one or more tags. Confirm each tag with the Spacebar key, a comma, or the Enter key. You can use tags to group objects and use tag-filtered views later on. Tags are not case-sensitive. Tags are automatically inherited.
It is not possible to enter tags with a leading plus (+) or minus (-) sign, nor tags with parentheses (()) or angle brackets (<>).
For performance reasons, it can take some minutes until you can filter for new tags that you added.
The sensor has the following default tags that are automatically predefined in the sensor's settings when you add the sensor:
|
Priority
|
Select a priority for the sensor. This setting determines the position of the sensor in lists. The highest priority is at the top of a list. Choose from the lowest priority () to the highest priority ().
|
VMware Virtual Machine Settings
VMware Virtual Machine Settings
|
|
Managed Object Identifier (MOID)
|
Shows the managed object identifier (MOID) of the VM that this sensor monitors.
PRTG shows this value for reference purposes only. If you need to change this value, add the sensor anew.
|
Powered-Off VM Handling
|
Define how the sensor reacts to VMs that are powered off:
- Alarm when VM is powered off (default): Change to the Down status if the VM is powered off.
If the sensor is in the Down status, it does not record any data in any of its channels.
- Ignore powered-off state: Do not change to the Down status if the VM is powered off. The sensor reports zero values instead.
|
Result Handling
|
Define what PRTG does with the sensor result:
- Discard result: Do not store the sensor result.
- Store result: Store the last sensor result in the \Logs\sensors subfolder of the PRTG data directory on the probe system. The file names are Result of Sensor [ID].txt and Result of Sensor [ID].Data.txt. This setting is for debugging purposes. PRTG overwrites these files with each scanning interval.
This option is not available when the sensor runs on the hosted probe of a PRTG Hosted Monitor instance.
In a cluster, PRTG stores the result in the PRTG data directory of the master node.
|
Sensor Display
Sensor Display
|
|
Primary Channel
|
Select a channel from the list to define it as the primary channel. In the device tree, the last value of the primary channel is always displayed below the sensor's name. The available options depend on what channels are available for this sensor.
You can set a different primary channel later by clicking below a channel gauge on the sensor's Overview tab.
|
Graph Type
|
Define how different channels are shown for this sensor:
- Show channels independently (default): Show a graph for each channel.
- Stack channels on top of each other: Stack channels on top of each other to create a multi-channel graph. This generates a graph that visualizes the different components of your total traffic.
You cannot use this option in combination with manual Vertical Axis Scaling (available in the channel settings).
|
Stack Unit
|
This setting is only visible if you enable Stack channels on top of each other as Graph Type. Select a unit from the list. All channels with this unit are stacked on top of each other. By default, you cannot exclude single channels from stacking if they use the selected unit. However, there is an advanced procedure to do so.
|
Inherited Settings
By default, all of these settings are inherited from objects that are higher in the hierarchy. We recommend that you change them centrally in the root group settings if necessary. To change a setting for this object only, click under the corresponding setting name to disable the inheritance and to display its options.
For more information, see section Inheritance of Settings.
Scanning Interval
Scanning Interval
For more information, see section Root Group Settings, section Scanning Interval.
Schedules, Dependencies, and Maintenance Window
You cannot interrupt the inheritance for schedules, dependencies, and maintenance windows. The corresponding settings from the parent objects are always active. However, you can define additional schedules, dependencies, and maintenance windows. They are active at the same time as the parent objects' settings.
Schedules, Dependencies, and Maintenance Window
For more information, see section Root Group Settings, section Schedules, Dependencies, and Maintenance Window.
Access Rights
Access Rights
For more information, see section Root Group Settings, section Access Rights.
Channel Unit Configuration
Which channel units are available depends on the sensor type and the available parameters. If no configurable channels are available, this field shows No configurable channels.
Channel Unit Configuration
For more information, see section Root Group Settings, section Channel Unit Configuration.
Channel List
Which channels the sensor actually shows might depend on the target device, the available components, and the sensor setup.
|
|
CPU Ready (Percent)
|
The CPU readiness in percent
|
CPU Usage
|
The CPU usage in percent
This channel is the primary channel by default.
|
Datastore Total Read Latency
|
The datastore total read latency in milliseconds (msec)
|
Datastore Total Write Latency
|
The datastore total write latency in msec
|
Disk Read
|
The disk read speed in bytes per second
|
Disk Usage
|
The disk usage per second
|
Disk Write
|
The disk write speed in bytes per second
|
Downtime
|
In the channel table on the Overview tab, this channel never shows any values. PRTG uses this channel in graphs and reports to show the amount of time in which the sensor was in the Down status in percent.
|
Memory Active
|
The active memory in bytes
|
Memory Consumed
|
The consumed memory in bytes
|
Memory Consumed (Percent)
|
The memory consumed in percent
|
Network Received
|
The received bytes per second
|
Network Transmitted
|
The transmitted bytes per second
|
Network Usage
|
The total network usage in bytes per second
|
Power
|
The average host power usage in watts
|
More
Knowledge Base
I cannot add VMware sensors because of "wrong" password although it is correct. What can I do?
Why are my VMware sensors not working after upgrading to VCSA 6.5 U1?
Which .NET version does PRTG require?
How can I increase the connection limit on VMware systems? PE121
What security features does PRTG include?
Monitoring VMware ESXi 5.5 does not work. What can I do?
For which sensor types do you recommend Windows Server 2012 R2 or later and why?